All types of sanitizers work best in water that is properly balanced. Balanced water is also more comfortable for swimmers and helps to extend the life of the equipment. pH is the primary factor in balanced water.
What is pH?
pH is a number that characterizes the acidic or basic characteristics of a liquid substance. Measured on a scale from 0-14, acidity and basicity are opposites on the pH scale with seven being neutral.
What the Pool / Spa Owner Wants to Know About pH
A typical pool / spa owner only wants to know things that affect them. So what are the features of water with a proper pH? What are the benefits of these pH features?
§ Swimmers are comfortable.
§ Water remains clear.
§ The pool/spa equipment and surface last longer and perform better.
§ The sanitizers in the water work more efficiently.
Acceptable pH range: 7.2 to 7.6 (Ideal 7.4 to 7.6)
If pH is too high or too low, the water will feel uncomfortable to swimmers. As a matter of fact, an improperly balanced pH causes most complaints of itchy or irritated skin and burning, blood-shot eyes. What chemical is typically given the rap for these water characteristics? The answer is chlorinating products. Now we know chloramines do pose some discomfort to bathers but a pool or spa owner that performs proper maintenance minimizes this discomfort.
Generally speaking, a high pH will promote cloudy water and a low pH will promote clear water. As a matter of fact, low pH is a huge problem because the water does not give the owner any visual clue that there is a problem. After all, the water is sparkling clear, and that’s what they wanted. They think, “If it looks good, then it must be good.” This low pH is not only eating away at the swimmers, it is also eating away at the pool and equipment. It is only a matter of time before major expenses are incurred as a result of the corrosive nature of a low pH. A high pH is typically handled more quickly because the water will begin to cloud. This visual clue will prompt pool/spa owners to do something because they know they have a problem.
Surface and Equipment Longevity
Corrosion: The eating away of metals and surfaces (caused by low pH). This leads to costly replacement of things like: handrails, lights assemblies, the plaster surface, the vinyl liner, pump impellers and seals, and heat exchangers. These problems can be prevented by maintaining proper pH.
Scale: A mineral build-up, especially calcium, that forms on surfaces and reduces equipment efficiency. Scale formation on the surface is unsightly and uncomfortable to walk or sit on. Scale formation in the plumbing, filter and heater ultimately cost the owner money. Circulation is choked off from scale formation in the plumbing. Filtration is impossible when the filter media is clogged with scale, ultimately resulting in cloudy water. All of these conditions can be prevented. The most likely cause of mineral build up is high PH or Total Alkalinity…. lower to the bottom of their ideal level.
Of the three primary sanitizers we have discussed (chlorinating products, brominating products, and biguanide), chlorinating products are the most vulnerable to an improperly balanced pH. Simply put, when the pH is below 7.2, the activity of chlorinating products increases to such an accelerated rate that the HOCl residual leaves the water prematurely. When the pH is above 7.6, the amount of HOCl is reduced to the point where it cannot provide adequate sanitizing opportunity to the water. In either case, more HOCl is required to compensate for the inefficiency that the pH is causing. Brominating products (HOBr) are more tolerant of the pH, maintaining adequate sanitizing effectiveness in a wider pH range. Biguanide (PHMB) sanitizing effectiveness is not as adversely affected by pH swings one way or the other. However, the effectiveness of the sanitizer is only one of four reasons to monitor the pH.
All of our stores are equipped with state of the art water testing labs and we offer free water testing and classes on maintaining spa water.